oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 809-sl115.3m-05a 115.30 mhz if saw filter 6.20 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 809-sl115.3m-05a january 2011 rev a 115.30 mhz if saw filter 6.20 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, e, f, g, h, j ground i input d output test fixture & values input l1 = 27 nh, c1 = 200 pf output l2 = 47 nh, c2 = 82 pf source/load impedance 50 ?
oscilent part number 809-sl115.3m-05a january 2011 rev a 115.30 mhz if saw filter 6.20 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -5 - 70 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 115.30 - insertion loss at fo db - 13.20 15.00 temperature coefficient ppm/ c - -20 - group delay variation at fo2.2mhz nsec - 40 80 absolute delay at fo usec - 0.84 - passband ripple at fo2.2mhz db - 0.30 0.70 bandwidth at -1db mhz 5.00 6.20 - bandwidth at -3db mhz - 7.00 - bandwidth at -40db mhz - 10.18 10.80 ultimate rejection db 45 50 -
oscilent part number 809-sl115.3m-05a january 2011 rev a 115.30 mhz if saw filter 6.20 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db wide
oscilent part number 809-sl115.3m-05a january 2011 rev a 115.30 mhz if saw filter 6.20 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo2.2mhz group delay variation fo2.2mhz smith chart
oscilent part number 809-sl115.3m-05a january 2011 rev a 115.30 mhz if saw filter 6.20 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|